Back to Home Page

NewChallengerStore.com
CHALLENGER Side Marker Light Bezels
For Part: #ACC-152007 / ACC-152032

 
INSTALLATION INSTRUCTIONS

PARTS INCLUDED:  4 x Stainless Side Marker Bezels, 1 x Adhesive Promoter Pen

Your side marker bezels are designed to attach directly on the side marker red lens.  

1.  Clean each side marker lens with household rubbing alcohol to remove any wax and dirt.

2.  Once completely clean use a piece of test tape (included) to see if it sticks to the lens surface.  If it does proceed.  If it does not stick well re-clean.
Now using the adhesive promoter (included) swipe each red lens area you will be mounting trim on. 

3.  Before removing the rear red liner - Place each bezel into position to familiarize yourself with exactly how it will fit.
VERY IMPORTANT: It will be necessary to hand form by slightly bending the trim piece with your hands to make them conform to the shape of the car before installing; doing this will prevent any possibility of the bezel popping loose or lifting long term. 

4.  Once they are fitted properly peel off and remove the rear red liner from the back of one trim bezel and carefully it nice and evenly around light. Press firmly to set.
Repeat for the other trim pieces. 

                         

     DO NOT GET WET FOR 24 HOURS.   For Help - please call 352 688 8160 M-F or email us at admin@NewChallengerStore.com

NewChallengerStore.com a HotCarAccessories.com website
 2005-2013 copyright
Not affiliated with Dodge, Chrysler Corporation or it's divisions.